欧美日韩国产一区二区三区地区,亚洲一区二区三区欧美,欧美成人ⅴideosxxxxx,亚洲国产一区二区三区

<br />
<b>Warning</b>:  Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/m.zionsfiction.com/wp-content/themes/onii/header-pc.php</b> on line <b>27</b><br />

安裝說明VIEWS

HTA吊式彈簧減震安裝說明


來源:http://m.zionsfiction.com/1359.html 發布于:2018-11-14 04:03   瀏覽:5,306

HTA吊式彈簧減震器安裝說明
HTA Hanging type Spring shock absorber Installation instructions

安裝前,請確認淞江集團吊式彈簧減震器的型號和規格是否正確。
Before installation,make sure the model and the specification are correct.
安裝說明
Installation guide
所需工具:公制口徑17mm(M10)、19mm(M12)、24mm(M16)開口扳手。
Required tools:17mm(M10)、19mm(M12)、24mm(M16)open wrenches.
先與安裝位置處依據施工規范預埋符合荷重要求的基礎螺栓。(如圖1)
Embed required foundation bolts according to the loading on the installation location.(Fig 1)

HTA吊式彈簧減震安裝說明

吊式彈簧減震器結構圖:
Hanging type shock absorber?structure drawing:
HTA吊式彈簧減震安裝說明

外形尺寸表:
Outline dimension table:

規格 A
(mm)
B
(mm)
C
(mm)
h1
(mm)
h2
(mm)
H
(mm)
BD
(mm)
HTA-A 37 50 25 7 45 80 8-10
HTA-B 40 60 28 7 65 110 10
HTA-C 70 90 40 25 90 150 12-14
HTA-D/E 86 120 50 20 130 200 12-16

安裝說明
Installation guide
將彈簧減震器裝到預留安裝位置的螺栓上面,并將螺栓鎖緊。(如圖2)
Fit spring dampers on the bolts at the reserved mounting position and lock the bolts.(Fig 2)
將彈簧減震器與設備連接的絲牙條裝上。(如圖3)
Fit the spring shock absorber with the wire bar attached to the device.(Fig 3)
使用上下兩顆螺帽安裝與設備連接的固定處,以便調整,此時上部螺帽不需要鎖緊。(如圖4)
Use the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.(Fig 4)
將設備安裝或配管安裝完成。
Complete the equipeent and piping engineering installation.
使用開口扳手調整下部螺帽來調整設備水平及彈簧壓縮量。(如圖5)
Apply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.(Fig 5)
調整完成后將上下兩顆螺帽相對鎖緊,即可完成淞江集團HTA吊式彈簧減震器的安裝調整。(如圖6)
Lock the upper and lower nuts after adjusting.(Fig 6)

安裝后請檢查彈簧下壓量,如彈簧壓到底,則表示荷重不足,沒有減震效果。應該更換較大荷重的彈簧減震器型號,并請于本公司業務人員聯系。
After the adjustment,check the press amount of the spring.If it appears with insufficient loading,please replace with bigger loading by contacting our staff.
安裝時 請注意安全。
Be cautious during the installation.
保養須知:每月要觀察固定螺栓是否有松動,保持彈簧減震器安裝時彈簧下壓撓度是否正常。
Maintenance checking points:remain M12 fixed bolt locked,balance of the base,installation of the isolator,and the deflection of the spring.

圖1)安裝前,請確認淞江集團吊式彈簧減震器的型號和規格是否正確。
Fig 1)Before installation,make sure the model and the specification are correct.
HTA吊式彈簧減震安裝說明

圖2)將彈簧減震器裝到預留安裝位置的螺栓上面,并將螺栓鎖緊。
Fig 2)Fit spring dampers on the bolts at the reserved mounting position and lock the bolts.
HTA吊式彈簧減震安裝說明

圖3)將淞江集團吊式彈簧減震器與設備連接的絲牙條裝上。
Fig 3)Fit the spring shock absorber with the wire bar attached to the device.
HTA吊式彈簧減震安裝說明

圖4)使用上下兩顆螺帽安裝與設備連接的固定處,以便調整,此時上部螺帽不需要鎖緊。
Fig 4)Use the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.
HTA吊式彈簧減震安裝說明

圖5)使用開口扳手調整下部螺帽來調整設備水平及彈簧壓縮量。
Fig 5)Apply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.
HTA吊式彈簧減震安裝說明

圖6)調整完成后將上下兩顆螺帽相對鎖緊,即可完成淞江集團HTA吊式彈簧減震器的安裝調整。
Fig 6)Lock the upper and lower nuts after adjusting.
HTA吊式彈簧減震安裝說明

點擊下載:HTA吊式彈簧減震安裝說明










最新推薦:
  • ·【上海徐家匯中心ITC項目】橡膠接頭合同
  • ·KST-F PVC DN100 雙球橡膠接頭
  • ·【生產現場】橡膠接頭開槽法蘭生產現場
  • ·一張圖紙讓你秒懂:蝶閥專用法蘭與普通法蘭的區別
  • ·中央空調風機盤管螺紋橡膠接頭安裝現場
  • ·污染問題:飲用水源受到最新關注
  • ·【青山科技城綜合體項目】法蘭金屬軟管合同案例
  • ·【重慶中迅廣場項目】彈簧減震器合同
  • ·廈門雙子大廈項目暖通系統水泵橡膠接頭
  • ·【武漢景瑞天賜項目】生活水泵組球墨橡膠接頭案例
  • 主站蜘蛛池模板: 隆化县| 泽州县| 灌南县| 新野县| 莒南县| 东兰县| 土默特左旗| 惠水县| 突泉县| 襄樊市| 贵州省| 太康县| 贵南县| 泰安市| 岢岚县| 扎囊县| 资中县| 永城市| 易门县| 大洼县| 城步| 德保县| 遵义市| 务川| 阿鲁科尔沁旗| 拜泉县| 玛多县| 新绛县| 陵川县| 福州市| 句容市| 大方县| 五指山市| 乐至县| 应用必备| 陇南市| 德州市| 南和县| 彰化县| 嘉善县| 阜康市|